We produce melt-pressure transducers specialized for extrusion machinery, such as non-woven machine, extruder, injection molding machine, film blowing machine, pelletizer, etc.
PT124G-123 series melt pressure transducer can replace Dynisco, Gefran, GP50, etc. international brand absolutely.
Features
- PT124G-123 Series Melt Pressure Transducer(Flexible stem & High accuracy ), this series adopts special construction and excellent alloy elastic membrane to reduce the thermal draft and improve the accuracy.
- Zero & full span can be adjustable, an amplified signal can be connected with PLC, which is the international standard.
- It is suitable for pressure measuring and controlling in melt fluid medium, such as the plastic & polymer in the process equipment.
- Can replace Dynisco / Gefran /GP50 etc. international brand absolutely.
Applications
- Chemical fiber & spinning Equipment
- Plastic and rubber, polyester process equipment
- Other pressure measurement and Control
Basic Specification
Pressure range | 0-3.5MPa…0-150MPa (0-500psi…20000psi) |
Over Pressure | 1.5 X FSO |
Combined Error | ± 0.5% FSO (Including Linearity, Repeatability & Hysteresis) |
Output | 3.33 mV/V, 2mV/V |
Input Voltage | 10VDC |
Repeatability | +/- 0.2%FSO |
Bridge Resistance Input | 345 Ohms minimum |
Bridge Resistance Output | 350 Ohms +/- 10% |
Internal Shunt Calibration (R-Cal) | 80% FSO +/- 1% |
Insulation Resistance | 200 megohms @ 100 Vdc |
Max Diaphragm Temperature | 300 ℃ |
Mounting Torque | 500 inch/lbs. max. |
Standard Wetted Parts | Diaphragm coated 15-5 PH SST |
Electrical connector | 6PIN connector |
Process connector | 1/2″-20UNF, M14×1.5, M18×1.5 Optional |